inches (millimeters) customer drawings available upon request cambridge products, p.o. box 1732, waseca, mn 56093-0832 1-800-243-8814 fax: 507-833-6287 www.cambridgeproducts.com uhf straight crimp type plug - crimp contact 1. identify connector parts. (3 piece parts) except CPL-259-10 (1 piece) 2. slide crimp sleeve over cable and strip cable to dimensions shown. do not nick center conductor dur- ing strip operations. (CPL-259-10: trim braid and insulation to .300 (7.62). 3. slide coupling nut onto the con- nector body. then slide the con- nector body over cable so that the center conductor extends through the front of the contact. crimp the contact as shown. trim away the center conductor extending past the contact. (CPL-259-10: fold braid onto jacket before sliding connector body onto cable.) 4. arrange braid uniformly around crimp stem. slide crimp sleeve over braid and crimp securely using recommended crimp tool. part number cable type a b wire gauge wire decimal jacket o.d. CPL-259-1 rg-58 .754 (19.15) .810 (20.57) 20 .0325 (0.83) .185 (4.70)-.205 (5.21) part wire wire jacket crimp crimp contact recommended number cable gauge decimal o.d. (braid hex) (strain relief) crimp hex crimp tool CPL-259-1 rg-58 20 .0325 .185 (4.07)-.205 (5.21) .255 (6.48) .213 (5.41) .065 (1.65) 24-307
cambridge products, p.o. box 1732, waseca, mn 56093-0832 1-800-243-8814 fax: 507-833-6287 www.cambridgeproducts.com inches (millimeters) customer drawings available upon request uhf connectors specificaitons standard uhf electrical characteristics impedance: nonconstant frequency range: 0-500 mhz working voltage: 500 volts rms at sea level dielectric withstanding voltage: 1500 volts rms at sea level insulation resistance: 5000 megohms minimum environmental characteristics recommended temperature range: -55 o c to +85 o c mechanical characteristics durability: 500 cycles cable retention: 20 lbs., rg-58 c/u cable materials body and coupling nut: zinc or brass contact: beryllium copper or brass crimp sleeve: brass insulator: delrin plating: body - nickel crimp sleeve - nickel contact - gold or nickel the uhf connectors are low cost, general purpose units designed for low fre- quency system applications. these commercial quality connectors are equipped with threaded coupling interfaces for secure and reliable connections. the stan- dard uhf and mini uhf connectors are not intermateable.
|
